prikaz prve stranice dokumenta Projekt sustava za umjeravanje mjerila razine vode
  Download
PDF 2.63 MB
undergraduate thesis
Projekt sustava za umjeravanje mjerila razine vode
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:569159
Deriš, Tomislav
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Deriš, T. (2020). Projekt sustava za umjeravanje mjerila razine vode (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:569159

Deriš, Tomislav. "Projekt sustava za umjeravanje mjerila razine vode." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:569159

Deriš, Tomislav. "Projekt sustava za umjeravanje mjerila razine vode." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:569159

Deriš, T. (2020). 'Projekt sustava za umjeravanje mjerila razine vode', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 24 April 2024, https://urn.nsk.hr/urn:nbn:hr:235:569159

Deriš T. Projekt sustava za umjeravanje mjerila razine vode [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 April 24] Available at: https://urn.nsk.hr/urn:nbn:hr:235:569159

T. Deriš, "Projekt sustava za umjeravanje mjerila razine vode", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:569159

Please login to the repository to save this object to your list.
Metadata
TitleProjekt sustava za umjeravanje mjerila razine vode
Title (english)Design of measurement system for calibration of water level sensors
AuthorTomislav Deriš
MentorLovorka Grgec Bermanec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-02-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Process Energy Engineering
Abstract
U ovom radu cilj je bio projektirati i izraditi tlačnu komoru za ispitivanje mjerila dubine te provesti sljedivo umjeravanje barem jednog osjetnika. U prvom djelu zadatka dana je teorijska osnova kojom su opisane mogućnosti i metode mjerenja razine vode. Nakon toga je dan opis konstrukcijskog rješenja tlačne komore, projektirana tlačna komora je zrakotijesna do pretlaka 2 bara te se sastoji od pocinčane cijevi nazivnog promjera 32mm i duljine 600mm, lijevanih kapa i brtvenog materijala. Mjerenja su provedena na mjernoj liniji koja se sastojala od tlačnog kalibratora, barometra, tlačne komore i predmeta umjeravanja. Predmet umjerevanja je bilo mjerilo razine vode mjernog područja do 9 metara dubine. Tijekom razrade ovog zadatka korištene su smjernice prema metodama DKD-R6-1 i EURAMET. Korištena je etalonska mjerna oprema Laporatorija za procesna mjerenja.
Abstract (english)
The goal of this paper was to design and make a pressure vessel for calibrating depth sensors and to carry out at least one traceable calibration of a depth sensor. First of all, the theoritical background and the posibilities and methods of measuring depth and fluid level is given. Furthemore, the description of the pressure vessel is given, the designed pressure vessel must be airtight under overpressure od 2 bars and be made of 600 mm long galvanized steel pipe with a nominal diameter of 32 mm, cast caps and sealant material. Measurements were done on a measuring line made of a pressure calibrator, barometer, the designed pressure vessel and the subject of calibration. The subject od calibration was a depth sensor with a range of up to 9 meters. This paper was made with DKD-R6-1 and EURAMET guidelines. The reference equipment od the Laboratory for process measurements was used in this paper.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:235:569159
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
RepositoryRepository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb
Created on2020-02-21 14:24:52

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij