prikaz prve stranice dokumenta Utjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva
  Download
PDF 4.22 MB
undergraduate thesis
Utjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:235:628012
Marić, Davor
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Marić, D. (2021). Utjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:628012

Marić, Davor. "Utjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:628012

Marić, Davor. "Utjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:628012

Marić, D. (2021). 'Utjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 25 April 2024, https://urn.nsk.hr/urn:nbn:hr:235:628012

Marić D. Utjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2024 April 25] Available at: https://urn.nsk.hr/urn:nbn:hr:235:628012

D. Marić, "Utjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:628012

Please login to the repository to save this object to your list.
Metadata
TitleUtjecaj sigma-faze na abrazijsku otpornost nehrđajućeg dupleks čeličnog lijeva
Title (english)Influence of sigma phase on abrasion resistance of duplex cast stainless steel
AuthorDavor Marić
MentorVera Rede (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-02-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Osnovni cilj rada bio je istražiti utjecaj sigma-faze na abrazijsku otpornost dupleks nehrđajućeg čeličnog lijeva oznake GX2CrNiMoN 25-6-3. U teorijskom dijelu rada opisana su svojstva, mikrostruktura, podjela te korozijska postojanost nehrđajućih čeličnih ljevova. Detaljno su opisani dupleks nehrđajući čelični ljevovi i mehanizam abrazijskog trošenja. U eksperimentalnom dijelu rada prikazani su rezultati mikrostrukturne analize, mjerenja tvrdoće HV10 i ispitivanja abrazijske otpornosti. Sva ispitivanja provedena su na uzorcima s osnovnom dupleks strukturom te na uzorcima kod kojih je žarenjem na 750˚C/1h u mikrostrukturi izlučena sigma-faza. Ispitivanje otpornosti na abraziju provedeno je metodom suhi pijesak gumeni kotač. Utvrđeno je da formiranje sigma-faze u mikrostrukturi dupleks nehrđajućeg čeličnog lijeva povećava tvrdoću, ali unatoč tome smanjuje otpornost na abrazijsko trošenje.
Abstract (english)
The main objective of this study was to analyse the influence of sigma-phase on the abrasion resistance of duplex cast stainless steel grade GX2CrNiMoN 25-6-3. In the theoretical part of this study, characteristics, microstructure, classification and corrosion resistance of cast stainless steels were described. Duplex cast stainless steels and abrasion wear mechanisms were thoroughly described. Results of microstructure analysis, HV10 hardness measurement and abrasive wear resistance test were shown in the experimental part of this study. All tests were carried out on both samples with regular duplex structure and on samples with sigma-phase formed in microstructure by annealing at 750°C/1h. Abrasion resistance test was carried out by dry sand/rubber wheel method. It was determined that, despite the increased hardness by formation of sigma-phase in the microstructure of duplex cast stainless steel, the abrasion resistance was reduced.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:628012
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
RepositoryRepository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb
Created on2021-02-19 16:01:33

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij