prikaz prve stranice dokumenta Kombinirano postrojenje za proizvodnju električne energije
Access restricted to students and staff of home institution
undergraduate thesis
Kombinirano postrojenje za proizvodnju električne energije
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:569971
Rajković, Marko
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Process Energy Engineering and Environment Protection

Cite this document

Rajković, M. (2018). Kombinirano postrojenje za proizvodnju električne energije (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:569971

Rajković, Marko. "Kombinirano postrojenje za proizvodnju električne energije." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:569971

Rajković, Marko. "Kombinirano postrojenje za proizvodnju električne energije." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:569971

Rajković, M. (2018). 'Kombinirano postrojenje za proizvodnju električne energije', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 25 April 2024, https://urn.nsk.hr/urn:nbn:hr:190:569971

Rajković M. Kombinirano postrojenje za proizvodnju električne energije [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 April 25] Available at: https://urn.nsk.hr/urn:nbn:hr:190:569971

M. Rajković, "Kombinirano postrojenje za proizvodnju električne energije", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:569971

Please login to the repository to save this object to your list.
Metadata
TitleKombinirano postrojenje za proizvodnju električne energije
Title (english)Combined cycle plan for electricity production
AuthorMarko Rajković
MentorIgor Bonefačić (mentor)
MentorVladimir Glažar (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberIgor Bonefačić (član povjerenstva)
Committee memberVladimir Glažar (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Process Energy Engineering and Environment Protection)
Rijeka
Defense date and country2018-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Zadatak ovog rada je projektirati jedan energetski blok snage 100 MWe koji radi na kombinirani plinsko-parni proces uz korištenje prirodnog plina kao goriva. Prije proračuna, opisano je kako je došlo do kombinarog ciklusa i što njega čini kompetitivnim u odnosu na samostalna plinska i parna turbinska postrojenja. Ukratko je opisan princip rada procesa i svaki njegov osnovni dio je prezentiran kao i načini na koji se povećava njegova učinkovitost. Za proračun izvršen je odabir plinske i parne turbine koje ispunjavaju zadane zahtjeve te su se njihovi poznati radni parametri uzeti za računanje, a oni kojih nije bilo su se pretpostavili uz pomoć dodatne literature. Najvažnije je u proračunu je bilo doći do parametara svih karakterističnih stanja procesa iz kojih se napravila toplinska bilanca i konačno došlo do iskoristivosti cijelog kombi procesa. Bilo je važno pokazati kako je u najkritičnijem području, onom na ulazu zagrijane vode u isparivač, pozitivan temperaturni gradijent, jer da nije proces nebi funkcionirao. To je i grafički prikazano u t-Q dijagramu. Nacrtana je još i idejna shema ovog projektiranog kombiniranog postrojenja i osmišljen je u izvedbi 2x1, dvije plinske turbine na jednu parnu.
Abstract (english)
Mission of this paper was to design and calculate one 100 MW energy block which operate on combined cycle with use of natural gas as fuel. Before calculations, in introduction it's been described how combi cycle came abour and what makes him competitive to single gas and steam turbine systems. The working principle of the process, each of its basic parts, as well as the ways of increasing its efficiency has been described. For the calculation, the selection of gas and steam turbines that meet the required initial requirements and their known working parametets were taken for computation and those that were not are assumed with help of additional literature. The essential thing in the proces was to find parameters of all the characteristic states from which the heat balance was made and ultimately efficiency of entire combined cycle. It was important to show that at the most critical area of the proces, entrance of heated water into evaporator, is a positive temperature gradient, because otherwise it wouldn't work. This is also graphically shown in the t-Q diagram. The conceptual design of this combined working energy block is also drawn and designed in the configuration of 2x1, two gas and one steam turbine.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:569971
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of the University of Rijeka, Faculty of Engineering
Created on2018-09-05 08:23:11

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij