Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika

Bandov, Luka

prikaz prve stranice dokumenta Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika

Access restricted to students and staff of home institution

undergraduate thesis

Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika

Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:191200

Bandov, Luka

University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Cite this document

APA 6th Edition

Bandov, L. (2018). Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:191200

MLA 8th Edition

Bandov, Luka. "Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:191200

Chicago 17th Edition

Harvard

Bandov, L. (2018). 'Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 24 April 2024, https://urn.nsk.hr/urn:nbn:hr:190:191200

Vancouver

Bandov L. Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 April 24] Available at: https://urn.nsk.hr/urn:nbn:hr:190:191200

IEEE

L. Bandov, "Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:191200

Cite this item: https://urn.nsk.hr/urn:nbn:hr:190:191200

Please login to the repository to save this object to your list.

Metadata

Title	Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika
Title (english)	Design and 3D print of a gearbox housing
Author	Luka Bandov
Mentor	Robert Basan (mentor)
Committee member	Kristian Lenić (predsjednik povjerenstva)
Granter	University of Rijeka Faculty of Engineering (Department of Mechanical Engineering Design) (Section of Construction and Precision Engineering) Rijeka
Defense date and country	2018-09-18, Croatia
Scientific / art field, discipline and subdiscipline	TECHNICAL SCIENCES Mechanical Engineering
Abstract	U ovom radu dan je kratak uvod o zupčastim prijenosnicima, odnosno reduktorima, pri čemu se daje osvrt o kućištima reduktora na kojima je ovaj rad i baziran. Nakon uvoda slijedi analiza i ispravak grešaka na postojećim nacrtima kućišta dvostupanjskog reduktora prema pravilima za tehničko dokumentiranje i ispravno konstruiranje. Budući da su ispravljene sve vidljive greške uslijedila je izrada računalnog 3D modela kućišta, prilikom koje su pronađene dodatne greške koje nisu vidljive na nacrtima, te su također dokumentirane. Iz gotovog modela se izvuku ispravljeni nacrti, a model se dodatno pripremi za 3D ispis, s time da je prije pripreme modela nešto u kratko rečeno o tehnologiji 3D ispisivanja. Na kraju se pripremljeni model ispiše pomoću 3D pisača, a rezultat ispisa se dokumentira pripadajućim slikama.
Abstract (english)	This paper starts with a brief introduction to gearboxes, respectively reducers, in which the main overview is based on gearbox housings. After the introduction, the errors on the existing drawings of the two-stage gearbox housing were analysed and corrected following the rules for technical documentation and correct designing. Since all the visible errors were corrected, a digital 3D model of the housing was created, where additional errors, which were not visible on the drawings, were also documented. From the finished model, the corrected drawings are taken out, and the model is further prepared for 3D printing, but before the preparation of the model something short is said about 3D printing technology. Finally, the prepared model is printed using a 3D printer, and the print result is documented with the associated pictures.
Keywords
Keywords (english)
Language	croatian
URN:NBN	urn:nbn:hr:190:191200
Study programme	Title: Mechanical Engineering Study programme type: university Study level: undergraduate Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resource	Text
File origin	Born digital
Access conditions	Access restricted to students and staff of home institution
Terms of use
Repository	Repository of the University of Rijeka, Faculty of Engineering
Created on	2018-10-26 07:47:04

Nacionalna i sveučilišna knjižnica u Zagrebu

Dabar