prikaz prve stranice dokumenta KONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA
Access restricted to students and staff of home institution
undergraduate thesis
KONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:222989
Mališa, Matej
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Cite this document

Mališa, M. (2019). KONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:222989

Mališa, Matej. "KONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:222989

Mališa, Matej. "KONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:222989

Mališa, M. (2019). 'KONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 18 April 2024, https://urn.nsk.hr/urn:nbn:hr:190:222989

Mališa M. KONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 April 18] Available at: https://urn.nsk.hr/urn:nbn:hr:190:222989

M. Mališa, "KONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:222989

Please login to the repository to save this object to your list.
Metadata
TitleKONSTRUIRANJE I DIMENZIONIRANJE STUPNOG POSTOLJA VJETROTURBINE U SKLADU S DNV SMJERNICAMA
Title (english)DESIGN OF A WIND TURBINE POLE BASE IN ACCORDANCE WITH DNV GUIDELINES
AuthorMatej Mališa
MentorRobert Basan (mentor)
MentorTea Marohnić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRobert Basan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2019-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu objašnjene su osnove o vjetroturbinama, opisane su tehničke osobine svakog dijela vjetroturbine kao i vjetroturbine u cjelini. Pojedinačno su sagledani svi dijelovi vjetroturbine svrstani u četiri grupe, a to su: rotor, kućište, postolje i temelji. Prikazana je razlika između različitih tipova vjetroturbina, te njihove prednosti i mane. Date su i određene smjernice i prijedlozi za izradu vjetroturbina. Izvršen je proračun žičano učvršćenog stupnog postolja u kojem se vrši prikaz izbora materijala i elemenata od kojih će se izraditi vjetroturbina. Određene su tehnike spajanja dijelova, te osim objašnjenja montaže i demontaže, konstruirana je i transportna kutija. Paralelno s konstruiranjem vođen je proračun sila i naprezanja po pojedinim dijelovima. Nakon proračuna postolja izrađen je 3D računalni model čija je tehnička dokumentacija priložena u ovaj rad, te isto tako i umanjeni fizički model vjetroturbine čiji je postupak izrade prikazan u ovom radu.
Abstract (english)
This final paper explains the basics of wind turbines, describes the technical characteristics of each part of the wind turbine as well as the wind turbines as a whole. All parts of the wind turbine were individually classified into four groups, namely: rotor, housing, base and foundations. The difference between different types of wind turbines, their advantages and disadvantages is shown. Some guidelines and suggestions for making wind turbines are also given. The calculations of the wire-fastened column stand were made, in which a selection of materials and elements from which the wind turbine would be made was presented. Techniques for connecting the parts were determined, and apart from explaining the assembly and disassembly, a transport box was also constructed. In parallel with the design, the calculation of forces and stresses on individual parts is conducted. After calculating the stand, a 3D computer model was created whose technical documentation is enclosed in this paper, as well 90 as a reduced physical model of the wind turbine, whose design procedure is presented in this paper.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:222989
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of the University of Rijeka, Faculty of Engineering
Created on2020-03-09 20:45:11

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij