prikaz prve stranice dokumenta PROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA
Access restricted to students and staff of home institution
undergraduate thesis
PROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:371103
Matahlija, Andrej
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Cite this document

Matahlija, A. (2019). PROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:371103

Matahlija, Andrej. "PROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:371103

Matahlija, Andrej. "PROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:371103

Matahlija, A. (2019). 'PROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 19 April 2024, https://urn.nsk.hr/urn:nbn:hr:190:371103

Matahlija A. PROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 April 19] Available at: https://urn.nsk.hr/urn:nbn:hr:190:371103

A. Matahlija, "PROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:371103

Please login to the repository to save this object to your list.
Metadata
TitlePROJEKT TEHNOLOŠKOG PROCESA KUĆIŠTA REGULATORA
Title (english)Process planning of the governor casing
AuthorAndrej Matahlija
MentorMladen Perinić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2019-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj rad obuhvaća projektiranje tehnološkog procesa kučišta regulatora. Svi ključni dijelovi tehnološkog procesa su obuhvaćeni u ovom radu, započevši s analizom s konstrukcijskog i tehnološkog stajališta. Nakon toga dolazi se do odabira ulaznog materijala, odljevak je optimalan izbor obzirom da sva ostala rješenja nisu bila ekonomski pogodna. Koncept tehnološkog procesa sadrži operacije glodanja, bušenja, upuštanja i izrade navoja. Nakon toga pristupa se detaljnoj razradi tehnološkog procesa i izračuna svih potrebnih parametra obrade, za svaki zahvat navedenih operacija. Slijedi izrada tehnološke dokumentacije. Na kraju izračunava se proizvodnu i ekonomsku brzinu rezanja za jedan zahvat grube i fine obrade. Izradom ovog završnog približio sam se struci te upoznao s mnogim zadacima koje ću morat rješavat na budućem poslu. Projektiranje tehnoloških procesa je složen zadatak, uključuje puno vremena i još više truda, ali je neophodan i vrlo cijenjen. Smatram da je ovo jako zanimljivo radno mjesto i planiram učiti i usavršavat se u tom smjeru.
Abstract (english)
This task covers the design of the technological process of the governor casing. All key parts of the technological process are covered in this project, starting with the analysis from a structural and technological standpoint. After that we come to the choice of input material, where I decided to cast, since all other solutions were not economically viable. The concept of the technological process includes milling, drilling, twisting and threading operations. After that, in the detailed elaboration of the technological process, I calculated all the necessary processing parameters for each operation of the above operations. The development of technological documentation followed. In the end, I calculated the production and economic cutting speed for a single coarse and fine machining operation. In the preparation of this final paper, I approached the profession and became acquainted with many tasks that I will have to solve in my future job. Designing technological processes is a complex task, it involves a lot of time and even more effort, but it is necessary and highly valued. I find this a very interesting and I plan to study and improve in this direction.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:371103
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of the University of Rijeka, Faculty of Engineering
Created on2020-05-09 21:12:48

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij