prikaz prve stranice dokumenta Analiza Wellsove turbine u laboratorijskim uvjetima
Access restricted to students and staff of home institution
undergraduate thesis
Analiza Wellsove turbine u laboratorijskim uvjetima
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:241566
Cindrić, Ivan
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Cite this document

Cindrić, I. (2018). Analiza Wellsove turbine u laboratorijskim uvjetima (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:241566

Cindrić, Ivan. "Analiza Wellsove turbine u laboratorijskim uvjetima." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:241566

Cindrić, Ivan. "Analiza Wellsove turbine u laboratorijskim uvjetima." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:241566

Cindrić, I. (2018). 'Analiza Wellsove turbine u laboratorijskim uvjetima', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 April 2024, https://urn.nsk.hr/urn:nbn:hr:190:241566

Cindrić I. Analiza Wellsove turbine u laboratorijskim uvjetima [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 April 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:241566

I. Cindrić, "Analiza Wellsove turbine u laboratorijskim uvjetima", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:241566

Please login to the repository to save this object to your list.
Metadata
TitleAnaliza Wellsove turbine u laboratorijskim uvjetima
Title (english)Wells turbine laboratory testing
AuthorIvan Cindrić
MentorLado Kranjčević (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberLado Kranjčević (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2018-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U sklopu ovog završnog rada dan je pregled uređaja za korištenje energije morskih valova s posebnim naglaskom na Wellsovu turbinu i zašto bi baš ona mogla biti najpogodnija za korištenje na Jadranskome moru. Sama Wells turbina kao i kapa koja ju štiti projektirana je u CATIA-i V5 R20. Nakon timske rasprave odlučeno je s kojim će se izgledom kape ići u 3D print te se moglo krenuti u sljedeću fazu, a to je bilo laboratorijsko ispitivanje. Kod laboratorijskog ispitivanja bitna su nam dva uređaja: podzvučni zračni tunel i generator valova. Opisani su načini radova oba uređaja te su dani parametri s kojima će se ići u ispitivanje turbine. Zračni tunel dao je ovisnost brzine strujanja i snage dok se generatorom valova nastojalo doći do idejnog rješenja još jedne bitne komponente u cijelom sklopu: rezonantne komore. U sklopu toga obrađeni su i maritimni uvjeti Jadranskog mora za koje se onda kreira komora. Na kraju, zbog ograničenosti s vremenom i nedostatkom materijala za 3D print, napravljena je numerička analiza toka fluida u softveru Ansys Discovery. On je dao neke konkretne podatke koji će poslužiti za usporedbu i orijentaciju u daljnjem postupanju sa Wells turbinom.
Abstract (english)
As a part of this thesis, a review has been given on wave energy converters with the special emphasis on the Wells turbine and why it could be most suitable to use in the Adriatic Sea. The Wells turbine as well as the cap that protects it is designed in the CATIA-i V5 R20. After the team discussion, it was decided which cap will go into 3D print and then everything could move on to the next stage which was a laboratory testing. There are two devices for the laboratory testing: subsonic wind tunnel and the wave generator. The methods on which both devices operates are described and the parameters that will be used for turbine testing are given. The air tunnel gave dependence of the flow velocity and power while with the wave generator there was an attempt to come up with the conceptual solution of yet another essential component: resonant chamber. Finally, due to the time constraints and the lack of the 3D printing material, a numerical analysis of the fluid flow in the Ansys Discovery sofware was made. He provided some specific data that will serve as a comparison and orientation in the further processing with the Wells turbine.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:241566
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of the University of Rijeka, Faculty of Engineering
Created on2018-09-04 06:52:42

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij