prikaz prve stranice dokumenta IZRADA DISTORZIJSKE PEDALE ZA GITARU
Access restricted to students and staff of home institution
undergraduate thesis
IZRADA DISTORZIJSKE PEDALE ZA GITARU
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:109250
Klen, Valentin
University of Rijeka
Faculty of Engineering

Cite this document

Klen, V. (2017). IZRADA DISTORZIJSKE PEDALE ZA GITARU (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:109250

Klen, Valentin. "IZRADA DISTORZIJSKE PEDALE ZA GITARU." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:109250

Klen, Valentin. "IZRADA DISTORZIJSKE PEDALE ZA GITARU." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:109250

Klen, V. (2017). 'IZRADA DISTORZIJSKE PEDALE ZA GITARU', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 25 April 2024, https://urn.nsk.hr/urn:nbn:hr:190:109250

Klen V. IZRADA DISTORZIJSKE PEDALE ZA GITARU [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 April 25] Available at: https://urn.nsk.hr/urn:nbn:hr:190:109250

V. Klen, "IZRADA DISTORZIJSKE PEDALE ZA GITARU", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:109250

Please login to the repository to save this object to your list.
Metadata
TitleIZRADA DISTORZIJSKE PEDALE ZA GITARU
AuthorValentin Klen
MentorMiroslav Vrankić (mentor)
Committee memberViktor Sučić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
U ovome završnom radu je opisan postupak izrade gitarske pedale za distorziju, zvane Dallas Rangemaster. Posebnost ove distorzijske pedale leži u tranzistoru od germanija, koji je rijedak is skup, te daje poseban zvuk. Pošto je shema sklopa predviđena za PNP tip tranzistora (pozitivno uzemljenje), bilo je potrebno prilagoditi shemu suvremenom načinu napajanja s negativnim uzemljenjem. Takva, modificrana shema originalne sheme, korištena je za simulaciju samog sklopa, u kojoj se prikazivao odziv sklopa na pobudu od 100 mV i 1 kHZ, prilikom promijene vrijednosti potenciometara. Nakon završene simulacije isprobao se čitav sklop na eksperimentalnoj pločici, te nakon što je sklop ispitan i uvjerenja da je sklop ispravan, bila je moguća izrada sklopa na pločici perfboard. Na samom kraju je bilo potrebno spojiti sklop na perfboard- u s hardverom na kućištu, te ispitati funkcionalnost cijelog sklopa s električnom gitarom kao ulaz sklopa te pojačalom za gitaru kao izlaz iz sklopa.
Abstract (english)
This graduation thesis describes the process of creating a distortion guitar pedal, called Dallas Rangemaster. The distinctiveness of this distortion pedal lies in the transistor made of germanium, which is rare and expensive, and gives a special sound. Since the circuit diagram is designed for the PNP type of transistor (positive ground), it was necessary to adapt the scheme to modern power supply with negative ground. Such a modified scheme of the original was used to simulate the circuit itself, in which the response of the circuit at 100 mV and 1 kHz was shown at the change of potentiometer values. After completion of the simulation, the assembley was tested on the experimental plate, and making sure that the assembly was functional, it was possible to make the assembly on a perfboard plate. At the very end, it was necessary to connect the assembly on the perfboard with hardware on the chasis, and test the entire assembly with an electric guitar as the circuit input, and a guitar amplifier as the output from the circuit.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:109250
Study programmeTitle: Electrical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of the University of Rijeka, Faculty of Engineering
Created on2017-10-26 09:28:37

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij