prikaz prve stranice dokumenta PROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA
Access restricted to students and staff of home institution
master's thesis
PROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:744195
Jelinić, Bernard
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Jelinić, B. (2019). PROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:744195

Jelinić, Bernard. "PROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:744195

Jelinić, Bernard. "PROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:744195

Jelinić, B. (2019). 'PROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 20 April 2024, https://urn.nsk.hr/urn:nbn:hr:153:744195

Jelinić B. PROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 April 20] Available at: https://urn.nsk.hr/urn:nbn:hr:153:744195

B. Jelinić, "PROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:744195

Please login to the repository to save this object to your list.
Metadata
TitlePROJEKTIRANJE VIŠE VARIJANTI TEHNOLOŠKOG PROCESA ZA IZRADU MODELA S KOMPLEKSNO OBLIKOVANIM POVRŠINAMA
Title (english)PROCESS PLANNING MULTIPLE VARIANTS FOR MODEL MACHINING WITH COMPLEXLY SHAPED SURFACES
AuthorBernard Jelinić
MentorIlija Svalina (mentor)
Committee memberIlija Svalina (član povjerenstva)
Committee memberGoran Šimunović (predsjednik povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je projektiran viševarijanti tehnološki proces izrade za pojednostavljeni dizajnerski model automobila. Izrađeno je šest varijanti izrade modela u kojem su prvi, drugi, peti i šesti tehnološki zahvat kod svih primijenjenih varijanti isti, dok se treći i četvrti tehnološki zahvati razlikuju. Navedeni tehnološki zahvati su opisani u radu. Od šest varijanti izrade po kriteriju najkraćeg komadnog vremena izabrana 3. varijanta kao najpovoljnija što je ujedno u bio cilj ovog diplomskog rada.
Abstract (english)
In this paper, a multifunctional technological process for simplified design car models has been designed. Six variants of modeling have been developed, in which the first, second, fifth and sixth technological processes are the same in all applicable variants, while the third and fourth technological processes are different. The above mentioned technological processes are described in the paper. Of the six variants of the shortest-time criterion, the 3rd variant was chosen as the most favorable, which was at the same time the goal of this graduate thesis.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:744195
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of Mechanical Engineering in Slavonski Brod
Created on2019-09-26 09:18:23

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij