prikaz prve stranice dokumenta Utjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja
  Download
PDF 4.45 MB
undergraduate thesis
Utjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja
Sisak: University of Zagreb, Faculty of Metallurgy, 2019. urn:nbn:hr:115:898393
Nikić, Marta
University of Zagreb
Faculty of Metallurgy

Cite this document

Nikić, M. (2019). Utjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja (Undergraduate thesis). Sisak: University of Zagreb, Faculty of Metallurgy. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:898393

Nikić, Marta. "Utjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja." Undergraduate thesis, University of Zagreb, Faculty of Metallurgy, 2019. https://urn.nsk.hr/urn:nbn:hr:115:898393

Nikić, Marta. "Utjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja." Undergraduate thesis, University of Zagreb, Faculty of Metallurgy, 2019. https://urn.nsk.hr/urn:nbn:hr:115:898393

Nikić, M. (2019). 'Utjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja', Undergraduate thesis, University of Zagreb, Faculty of Metallurgy, accessed 19 April 2024, https://urn.nsk.hr/urn:nbn:hr:115:898393

Nikić M. Utjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja [Undergraduate thesis]. Sisak: University of Zagreb, Faculty of Metallurgy; 2019 [cited 2024 April 19] Available at: https://urn.nsk.hr/urn:nbn:hr:115:898393

M. Nikić, "Utjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja", Undergraduate thesis, University of Zagreb, Faculty of Metallurgy, Sisak, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:115:898393

Please login to the repository to save this object to your list.
Metadata
TitleUtjecaj vremena zagrijavanja čelika u peći na debljinu oksidnog sloja
Title (english)Effect of the steel's heating time in furnace regarding thickness of the oxide layer
AuthorMarta Nikić
MentorMartina Lovrenić-Jugović (mentor)
MentorAnita Begić Hadžipašić (mentor)
MentorŽeljko Grubišić (pomoć pri izradi, neposredni voditelj)
Committee memberStjepan Kožuh (predsjednik povjerenstva)
Committee memberMartina Lovrenić-Jugović (član povjerenstva)
Committee memberAnita Begić Hadžipašić (član povjerenstva)
Committee memberZoran Glavaš (član povjerenstva)
Committee memberLjerka Slokar Benić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Metallurgy
Sisak
Defense date and country2019-07-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract
U prvom dijelu rada dan je teorijski pregled o konstrukcijskim čelicima s naglaskom na čelike za poboljšavanje. Opisana je njihova podjela i primjena. U teorijski dio rada uključene su i teorijske osnove o koroziji, a detaljnije je opisana kemijska korozija i korozija uzrokovana visokotemperaturnim zagrijavanjem. U eksperimentalnom dijelu rada korišteni su uzorci čelika za poboljšavanje HRN Č.4732, koji su u različitoj duljini trajanja bili podvrgnuti visokotemperaturnom zagrijavanju. Eksperiment je osmišljen u svrhu praćenja stvaranja oksida u ovisnosti o vremenu zagrijavanja. Uzorcima čelika izmjeren je prirast mase i debljina oksidnog sloja nakon zagrijavanja, pri čemu je ustanovljeno da se prirast mase povećava s vremenom zagrijavanja u peći. Napravljena je i analiza mikrostrukture čelika u nagriženom stanju, gdje se uočila pojava razugljičavanja po rubovima uzoraka.
Abstract (english)
First part consists of theoretical overview of structural steels with an emphasis on quenching and tempering steels with description of their use and classification. Followed by theoretical basis about corrosion with detailed description of chemical corrosion and corrosion caused by high temperature heating. In the experimental part of the thesis the samples of quenching and tempering steels HRN Č.4732 were used, which were subjected to high temperature heating. The experiment was design to monitor the formation of oxides in relation to the heating time. After the heating, the weight gain and the thickness of the oxide layer were measured. It was found out that the weight gain increases with the heating time in the furnace. The analysis of the microstructure of steel in etched condition was performed, where the appearance of the decarburization on the edges of the sample was observed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:115:898393
Study programmeTitle: Metallurgy; specializations in: Metallurgical Engineering, Industrial Ecology
Course: Metallurgical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka metalurgije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka metalurgije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
RepositoryRepository of Faculty of Metallurgy University of Zagreb
Created on2019-08-27 06:44:15

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij