Priključni uređaj za uklanjanje panjeva

Haramija, Dominik

prikaz prve stranice dokumenta Priključni uređaj za uklanjanje panjeva

Download
PDF 5.31 MB

master's thesis

Priključni uređaj za uklanjanje panjeva

Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:116173

Haramija, Dominik

University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

APA 6th Edition

Haramija, D. (2023). Priključni uređaj za uklanjanje panjeva (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:116173

MLA 8th Edition

Haramija, Dominik. "Priključni uređaj za uklanjanje panjeva." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:116173

Chicago 17th Edition

Harvard

Haramija, D. (2023). 'Priključni uređaj za uklanjanje panjeva', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:116173

Vancouver

Haramija D. Priključni uređaj za uklanjanje panjeva [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:235:116173

IEEE

D. Haramija, "Priključni uređaj za uklanjanje panjeva", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:116173

Cite this item: https://urn.nsk.hr/urn:nbn:hr:235:116173

Please login to the repository to save this object to your list.

Metadata

Title	Priključni uređaj za uklanjanje panjeva
Title (english)	Attached device for removing stumps
Author	Dominik Haramija
Mentor	Dragan Žeželj (mentor)
Granter	University of Zagreb Faculty of Mechanical Engineering and Naval Architecture Zagreb
Defense date and country	2023-07-21, Croatia
Scientific / art field, discipline and subdiscipline	TECHNICAL SCIENCES Mechanical Engineering General Mechanical Engineering (Construction)
Abstract	Tema ovog diplomskog rada je konstruiranje priključnog uređaja za uklanjanje panjeva koji je namijenjen za priključenje na traktor ili bager, jednostavan je za priključenje i nije namijenjen za masovno iskapanje panjeva. Analizom tržišta napravljenom u ovom diplomskom radu dobiva se bolja slika postojećih uređaja na tržištu. Napravljena su tri koncepta te je provedeno vrednovanje koncepata. Istraživanjem literature za obradu drva pomoću strojeva nađene su formule pomoću kojih se dobiva sila potrebna za rezanje drva za uvjete kada se reže panj. Na tržištu je odabran hidromotor koji je kompatibilan za bagere. Hidromotor je spojen na planetarni reduktor čiji proračun je proveden pomoću programa Kissoft, dok su se vratila proračunala ručno. Također je proveden proračun vratila i zavara na alatu za rezanje zajedno s alatom. Zbog složene geometrije napravljena je analiza pomoću metode konačnih elemenata (FEM) nosive konstrukcije. Izradom 3D modela i tehničke dokumentacije vide se svi dijelovi uređaja i njihove pozicije.
Abstract (english)	The topic of this graduation’s thesis is the construction of an attachment device for stump removal, intended for attachment to a tractor or excavator. The device is simple to attach and is not designed for mass stump excavation. By conducting market analysis in this thesis, a better understanding of existing devices on the market is obtained. Three concepts were developed, and concept evaluation was performed. By researching literature on wood processing using machinery, equations were found to determine the force required for cutting wood in conditions when cutting a stump. The hydraulic motor is connected to a planetary gearbox, the calculation of which was performed using the Kissoft software, while the shafts were calculated manually. Additionally, the calculation of the shafts and welds on the cutting tool, along with the tool itself, was conducted. Due to the complex geometry, a finite element analysis (FEM) was performed on the load-bearing structure. By creating a 3D model and technical documentation, all device components and their positions are visualized.
Keywords
Keywords (english)
Language	croatian
URN:NBN	urn:nbn:hr:235:116173
Study programme	Title: Mechanical Engineering Study programme type: university Study level: graduate Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resource	Text
File origin	Born digital
Access conditions	Open access
Terms of use
Repository	Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb
Created on	2023-07-06 16:55:12