prikaz prve stranice dokumenta Postupak toplinske obrade strojnog dijela LF.19-PT.21
Access restricted to authenticated users
undergraduate thesis
Postupak toplinske obrade strojnog dijela LF.19-PT.21
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:098376
Franolić, Luka
University of Rijeka
Faculty of Engineering
Department of Materials Science and Engineering
Section of Materials Engineering

Cite this document

Franolić, L. (2019). Postupak toplinske obrade strojnog dijela LF.19-PT.21 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:098376

Franolić, Luka. "Postupak toplinske obrade strojnog dijela LF.19-PT.21." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:098376

Franolić, Luka. "Postupak toplinske obrade strojnog dijela LF.19-PT.21." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:098376

Franolić, L. (2019). 'Postupak toplinske obrade strojnog dijela LF.19-PT.21', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 26 April 2024, https://urn.nsk.hr/urn:nbn:hr:190:098376

Franolić L. Postupak toplinske obrade strojnog dijela LF.19-PT.21 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 April 26] Available at: https://urn.nsk.hr/urn:nbn:hr:190:098376

L. Franolić, "Postupak toplinske obrade strojnog dijela LF.19-PT.21", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:098376

Please login to the repository to save this object to your list.
Metadata
TitlePostupak toplinske obrade strojnog dijela LF.19-PT.21
Title (english)Heat treating process of workpiece LF.19-PT.21
AuthorLuka Franolić
MentorDario Iljkić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Materials Science and Engineering)
(Section of Materials Engineering)
Rijeka
Defense date and country2019-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema završnog rada bila je „Postupak toplinske obrade strojnog dijela „LF.19-PT.21“. Zadani strojni dio izrađen je od čelika pa se sukladno tome i završni rad bazira na postupcima toplinske obrade čelika. Koncepcijski, rad je podijeljen u dvije veće cjeline, teoretsku i praktičnu. Teoretska cjelina podijeljenja je u tri dijela. U prvom dijelu pojašnjava se pojam čelika, navode se njegove podijele te primjena u praksi. Drugi dio obuhvaća mikrostrukturne promjene u čeliku tijekom toplinske obrade. Navode se moguće mikrostrukture čelika, njihov kemijski sastav te svojstva. Opisane su i pretvorbe kojima one nastaju te potrebni uvjeti za njihov nastanak. Također, svaka mikrostruktura popraćena je odgovarajućom slikom. Treći dio teoretskog dijela razmatra postupke toplinske obrade čelika. Navodi njihovu svrhu te svojstva koja nastaju nakon njihove primjene, odnosno promjene koje one uzrokuju u mikrostrukturi čelika. Navedeni su i parametri koje je potrebno odrediti za provođenje pojedinog postupka, što je popraćeno matematičkim izrazima i dijagramima, koji u tome pomažu. Praktični dio zadatka bazira se na određivanju parametara toplinske obrade cementiranja. Obuhvaća određivanje kemijskog sastava čelika 16MnCrS5, definiranje parametara cementiranja te detaljno razrađivanje samog postupka cementiranja po fazama, kao i potrebne matematičke izraze i dijagrame. Također, uključuje svu potrebnu tehnološku dokumentaciju.
Abstract (english)
The topic of my undergraduate thesis was „Heat treating process of workpiece LF.19- PT.21“. The workpiece assigned is made out of steel, consequently making my thesis centered around the heat treatment of steel. This assignment is separated into two major sections, theoretical and practical. The theoretical section is further divided into three smaller parts. In the first part, the definition of steel is explained, along with its types and practical application. The second part covers steel’s microstructures along with its chemical structure, all followed by images. The last part of the theoretical section presents different types of steel's heat treatment. The parameters required for every process, along with the suitable mathematical expressions and diagrams, are mentioned as well. The practical section of this assignment is based on determining the parameters needed for the heat treatment of cementation. This section also includes the chemical composition assessment for 16MnCrS5 steel. Moreover, the crucial parameters for cementation, as well as the detailed description of the process, are also covered. This is also followed by the corresponding mathematical expressions and diagrams. All of the required technological documentation has been attached as well.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:098376
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
RepositoryRepository of the University of Rijeka, Faculty of Engineering
Created on2020-02-09 22:00:33

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij