prikaz prve stranice dokumenta PRORAČUN NOSEĆEG OKVIRA KABINE DIZALA
Access restricted to students and staff of home institution
master's thesis
PRORAČUN NOSEĆEG OKVIRA KABINE DIZALA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. urn:nbn:hr:153:116384
Matanić, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Matanić, T. (2017). PRORAČUN NOSEĆEG OKVIRA KABINE DIZALA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:116384

Matanić, Tomislav. "PRORAČUN NOSEĆEG OKVIRA KABINE DIZALA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:116384

Matanić, Tomislav. "PRORAČUN NOSEĆEG OKVIRA KABINE DIZALA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:116384

Matanić, T. (2017). 'PRORAČUN NOSEĆEG OKVIRA KABINE DIZALA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 April 2024, https://urn.nsk.hr/urn:nbn:hr:153:116384

Matanić T. PRORAČUN NOSEĆEG OKVIRA KABINE DIZALA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 April 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:116384

T. Matanić, "PRORAČUN NOSEĆEG OKVIRA KABINE DIZALA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:116384

Please login to the repository to save this object to your list.
Metadata
TitlePRORAČUN NOSEĆEG OKVIRA KABINE DIZALA
Title (english)CALCULATION OF ELEVATOR CAR SLING
AuthorTomislav Matanić
MentorPejo Konjatić (mentor)
Committee memberPejo Konjatić (član povjerenstva)
Committee memberDražan Kozak (predsjednik povjerenstva)
Committee memberFranjo Matejiček (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je analiziran noseći okvir kabine dizala. Sklop je podvrgnut trima različitim stanjima opterećenja: ubrzanje dizala prema gore, ubrzanje prema dolje i stanje bez ubrzanja. Uočeno je da su najveća opterećenja koja djeluju na noseći okvir prilikom djelovanja ubrzanja dizala prema gore. Prilikom provođenja proračuna zaključeno je da su vijci dobro dimenzionirani, odnosno odabrani. Jednako tako prilikom provjere zadovoljavanja uvjeta čvrstoće, materijal se kao i cijela konstrukcija pokazao pouzdanim. Iako je uočeno da za optimiranjem konstrukcije gotovo da i nema potrebe, bilo bi dobro sklop podvrgnuti istim opterećenjima, ali sa posebno odabranim materijalima za svaki pojedini sklop te usporediti sa rezultatima u ovom radu.
Abstract (english)
In this paper the elevator car sling is analyzed. The assembly is subjected to three different load conditions: accelerating the elevator up, accelerating down and condition without acceleration. It has been noticed that the greatest loads is the one that is acting on the car sling during the acceleration of the lift upwards. When calculation is finished, it is concluded that the screws are well dimensioned and selected. Likewise, when assessing the fulfillment of strength conditions, the material as well as the entire proved to be reliable. Although it has been noticed that thare is almost no need for the optimization of the assembly, but it would be good to load assembly with the same loads but with the specially selected materials for each element and compare with the results in this paper.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:116384
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of Mechanical Engineering in Slavonski Brod
Created on2017-09-28 08:16:04

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij